Friday, 16 November 2018 - Buka jam 08.00 s/d jam 17.00 , Minggu libur
Home » Electrical Tester » Protek 6510 100MHz Dual Channel Analog Oscilloscope
Keranjang Belanja Anda
Jumlah Barang : pcs
Jumlah Nama Barang Total
0 Rp 0,00
keranjang anda kosong

* Klik tombol di bawah ini untuk menyelesaikan pemesanan.

Protek 6510 100MHz Dual Channel Analog Oscilloscope

Ditambahkan pada : October 31st, 2016
*Harga Hubungi Kami
Stock : Tersedia
Kode Produk :
Dilihat : 197 kali
Kategori : Electrical Tester
Bingung Cara Order / Pesan?
Customer Service Supplier Alat Uji Beton, Hammer Test, Alat Survey, GPS ( Global Positiongi System ), Meteran Laser siap melayani dan membantu Anda.

Protek 6510 100MHz Dual Channel Analog Oscilloscope

Features

  • Four traces may be simultaneously displayed in ALT-sweep
  • Five vertical display modes: CH1, CH2, Dual, Add, Subtract
  • Vertical mode triggering for displaying 2 unrelated signals
  • Trigger hold-off circuit for synchronizing complex waveforms
  • Sweep speeds to 2nS/ Div
  • 12kV acceleration voltage for bright displays of low duty cycle signals
  • Z axis input
  • TV Synchronization for either line or field patterns
  • 20MHz bandwidth limit switch for triggering signals in a noisy environment

 

Product Information

100 MHz 2Ch. Dual Time Base with Alt Mag.

 

Specifications

Vertical Amplifier (CH 1 and CH 2)

  • Sensitivity : 5 mV/Div to 5 V/ Div in 7 calibrated steps, (X5 Mag 1mV/ Div to 1 V/ Div)
  • Accuracy : ± 3% (± 5% in X5 Mag)
  • Bandwidth (-3dB) : DC to 100MHz
  • Rise Time : £ 3.5 ns, X5 Mag: 20MHz Bandwidth: £ 17 ns
  • Input Impedance : 1MW + 25 pF
  • Input Coupling : AC-Gnd-DC
  • Invert Channel : CH2
  • Display Modes : CH1, CH2, Add, Subtract, Dual (Alt/Chop)
  • Maximum Input Voltage : 400V (DC or AC peak)
  • CH1 Signal Output : 20mV into 50W

Horizontal Sweep

  • Timebase A – Sweep Time : 50ns/Div to 0.2 s/Div in 21 calibrated steps (1-2-5)
  • Timebase A – X10 Mag : 5ns/Div to 20ms/ Div
  • Timebase A – Accuracy : ± 3% (± 5% in X10 Mag)
  • Timebase A – Hold Off : Continuously adjustable to > 2X sweep time
  • Timebase B – Sweep Time : 50ns/Div to 10µ s/ Div in 8 steps (1-2-5)
  • Timebase B – Accuracy : ± 3%
  • Timebase B – Delay Time : Continuously variable from 0.2µ s to 2s
  • Timebase B – Delay Modes : Continuous or triggered
  • Timebase B – Sweep Displays : A, B, A alt B, B triggered, X-Y

X-Y Mode

  • CH1-X axis, CH2-Y axis Sensitivity : Same as CH1 vertical amplifier
  • Bandwidth (X-axis) : DC to 2MHz
  • Phase Error : £ 3° DC to 10kHz

Triggering

  • Trigger Modes : Auto, Normal, TV-V, TV-L
  • Source : Int. CH2, line ext.
  • Coupling : AC
  • Slope : Positive or negative
  • Trigger Sensitivity :
    • Int (DC to 10MHz) : 0.5 Div
    • Int (10MHz to 100MHz) : 1.5 Div
    • Ext (DC to 10MHz) : 200mV
    • Ext (10MHz to 100MHz) : 500mV
    • TV (Int) : 1 Div Min
    • TV (Ext) : 1V P-P
    • External Trigger Input : Impedance: 1MW + 20 pF
    • Maximum Input Volts : 400V DC or AC peak

Z Axis Modulation

  • Sensitivity : ± 5V P-P Intensity increases with a negative going voltage input
  • Bandwidth (-3dB) : DC to 2MHz
  • Input Impedance : Approx. 2 KW

Calibrator Signal

  • Voltage                : 0.5V ± 3% P-P 1kHz Square Wave
  • Duty Cycle : Approx. 50%

CRT

  • Type : 6″ rectangular CRT with internal graticule. (1 Div = 1cm)
  • Acceleration Voltage : 12 kV

General Specification

  • Power Requirements : AC Input Voltage: 100V, 120V, 220V, 240V selectable
  • Frequency : 50/60Hz
  • Power Consumption : 55W
  • Operating Temperature : 0 to 40° C at 35% to 85% relative humidity
  • Dimensions : 5.25″ H × 12.67″ W × 14.5″ D
  • Weight : 24 lbs.
  • Supplied Accessories : Manual, 1 AC Power cord, (2) X10 Probes.
Tags :
KONTAK KAMI ( Fast Respond )
*Kami siap melayani Anda dengan sepenuh hati!
Hotline : 081274087466
SMS Center : 081388031624
BBM : 28BB71E8 / 5B78DEE3
Via Yahoo Messenger :

Tulis komentar Anda tentang Protek 6510 100MHz Dual Channel Analog Oscilloscope


  • Belum ada testimoni
* klik gambar produk