Tuesday, 16 October 2018 - Buka jam 08.00 s/d jam 17.00 , Minggu libur
Home » Fiber Optic Test Equipment » Fluke Networks FI-7000-MPO 120 FiberInspector Pro with MPO and Cleaning
Keranjang Belanja Anda
Jumlah Barang : pcs
Jumlah Nama Barang Total
0 Rp 0,00
keranjang anda kosong

* Klik tombol di bawah ini untuk menyelesaikan pemesanan.

Fluke Networks FI-7000-MPO 120 FiberInspector Pro with MPO and Cleaning

Ditambahkan pada : July 26th, 2016
*Harga Hubungi Kami
Stock : Tersedia
Kode Produk :
Dilihat : 161 kali
Kategori : Fiber Optic Test Equipment
Bingung Cara Order / Pesan?
Customer Service Supplier Alat Uji Beton, Hammer Test, Alat Survey, GPS ( Global Positiongi System ), Meteran Laser siap melayani dan membantu Anda.

Fiber optic connector end-face contamination is a leading cause of fiber failures. Dirt and contaminant cause insertion loss and back-reflection that inhibits optical transmission and causes havoc with transceivers. Fiber loss and OTDR testing can expose this problem, but in many cases, dirty connections make fiber testing time consuming and inaccurate.
Since dirt can be an issue before, during, or after fiber optic certification testing, and migrate from one fiber optic connector end-face to another upon mating, both sides of any connection must always be cleaned and inspected. Further, mating contaminated fiber optic connectors can cause permanent damage as microscopic debris is crushed between end-faces in physical contact. Even factory terminated patch cords or pigtails must be inspected as protective caps do not keep fiber optic connector end-faces clean. Avoiding this common cause of failure, starts with inspecting the fiber optic connector end-face and eliminating any contamination before insertion into a bulkhead or piece of equipment.
The FI-7000 FiberInspector Pro is a fiber optic inspection scope that allows you to inspect and certify fiber optic connector end-faces in 2 seconds so you can get the job done the first time. This fiber optic inspection scope provides automated PASS/FAIL certification take the guess work out of fiber inspection so anyone can be a fiber expert.
Features:

FI-7000 120 FiberInspector Pro
Automated Pass/Fail acceptance testing of fiber end-faces
Graphical indication of problem areas due to contamination, pits, chips, and scratches
Large touchscreen for pinch and zoom
Certify to industry standards – IEC 61300-3-35
No more confusion about whether the fiber is good or bad
Eliminate human subjectivity from end-face measurements
Save end-face views during certification process
Reduce fiber inspection time with 2-second grading
ProjX system manages job requirements and progress from set-up to systems acceptance, making sure all tests are completedcorrectly
Taptive user interface simplifies set-up, and eliminates error
Analyze test results and create professional test reports using LinkWare management software

What’s in the Box:

(1) Versiv Mainframe
(1) FI-1000-KIT USB Fiber Inspection Video Probe with 4 tips in a box (LC, FC/SC bulkhead, 1.25 and 2.5mm universal)
(1) MPO Fiber Inspection Adapter Tip
(1) Click Cleaners for 1.25mm & 2.5mm ferrules and MPO/MTP connectors
(1) Blank Module to protect the mainframe’s rear connector
(1) AC Charger
(1) Shoulder Strap
(1) USB Interface Cable
(1) LinkWare Software CD
(1) User Manual CD
(1) Getting Started Guide
(1) Soft Carrying Case

Tags :
KONTAK KAMI ( Fast Respond )
*Kami siap melayani Anda dengan sepenuh hati!
Hotline : 081274087466
SMS Center : 081388031624
BBM : 28BB71E8 / 5B78DEE3
Via Yahoo Messenger :

Tulis komentar Anda tentang Fluke Networks FI-7000-MPO 120 FiberInspector Pro with MPO and Cleaning


  • Belum ada testimoni
* klik gambar produk